Your Partner for Metal Marking Solution with...
 
 
 
Laser Marking Systems

Laser marking is the practice of using lasers to engrave or mark an object. The technique does not involve tool bits which contact the engraving surface and wear out. This is considered an advantage over alternative engraving technologies where bit heads have to be replaced regularly.

The impact of laser engraving has been more pronounced for specially-designed "lacerable" materials. These include polymer and novel metal alloys.

Advantages
 
Permanent & almost Indelible Marking Process
Non-Contact Type: Doesn’t Produce stress or change physical properties of material
Clean & Safe Process: Chemical- proof, Water-proof, Oil, Grease & Fuel-proof.
Internationally accepted as quality marking standard
No Pre or Post Processing: Can be done on finished products
Automated: Can be integrated with existing production or packaging line, controlled by computer
Flexible: Mark texts, Logos, Alphanumeric, graphics, images, 2D data matrix code etc.
Least Set Up Time: No tooling to wear direct physical contact with work peace
Hardness: Doesn’t affect quality of marking
Cost Effective: Virtually no consumables
Enhances the aesthetical & monetary Value of products
Counterfeit & forgery prevention, product tracking & identification and so on...
 
Laser Markers are used in
 
AUTOMOBILE INDUSTRIES
AUTO ANCILLARIES
ENGINEERING INDUSTRIES
ELECTRICAL & ELECTRONICS INDUSTRIES
INDUSTRIAL TOOLINGS
SURGICAL TOOLS/BODY IMPLANTS
MEDICAL
JEWELRY
BATH FITTINGS AND GIFTWARE INDUSTRIES
 
Fiber Laser Marker – 10W/20W/30w/40w
Features :
 
High laser quality, good stability, small machine size, red beam indication.
Automatic Parameter according to laser power.
Long term maintenance free operation.
Windows XP/ VISTA/ Windows 7 Compatible.
Serial Number / Circular Marking.
PLT, DXF, JPG, TIFF, BMP can be marked.
Automation can be integrated with existing production line.
The average using time more than 100000 hours.
Internationally accepted as quality marking standard.
Flexible-mark texts, alphanumeric, logos, bar codes, graphics, images, 2D data matrix code etc.
Energy Consumption is lesser than ordinary laser machine.
No water cooling system is required

Technical Specification
 
  Laser   Fiber Marking laser
 Laser Source  Multi-Diode Pumped 
 Laser power  10W/20W
 Wavelength  1064 nm
 Beam quality M2   <2
 Peak to Peak Stability  5%
 Fiber Life  Approximate 100000 hours
 Repeat Rate  200 to 100000 Hz
 Repeatability  0.050mm
 Marking Area(in mm)  100 x 100
 (150 x 150, 200 x 200  Optional
 Marking Speed  Up to 7000 mm/sec.
 Min line width  0.008mm
 Electrical
 Electrical Connection  220V±10% V AC/
  50Hz / 7A
 Power Consumption  <2 KVA
 Ambient Temperature  10 °c to 35°c
 Cooling Pure Water  Air cooling
 Dimension
 Weight  Approximate 30 Kg
 Size ( in mm )  Approximate 535 x 435 x 710

 
Diode Pumped Laser Marker – 50W/75W/100W
Features :
 
Good stability, small machine size, red beam indication.
Professional control software can achieve automatic scheduling and edit for text, symbols, graphics, photos, bar codes, two-dimensional code, serial numbers etc.
Automatic Parameter according to laser power (optional)
Long term maintenance free operation.
Windows XP/ VISTA/ Windows 7 Compatible.
Serial Number / Circular Marking.
PLT, DXF, JPG, TIFF, BMP can be marked.
Automation – can be integrated with existing production or packaging line.
The average Diode Life is 10000 hours.
Least set up time required.
2.5 KVA Power consumption.
 
Technical Specification
 
  Laser   Diode marking Laser
 Laser Source  DPSS Q Switched YAG laser
 Laser power  75 W
 Wavelength  1064 nm
 Beam quality M2  <4 
 Peak to Peak Stability  2%
 Diode Life/ Lamp Life  10000 hours
 Repeat Rate  100 to 50000 Hz
 Repeatability  0.050 mm
 Marking Area(in mm)  100 x 100
 (150 x 150, 200 x 200  Optional)
 Marking Speed  Up to 7000 mm/sec.
 Min line width  0.020mm
 Electrical
 Electrical Connection  220±10% VAC,  Single Phase
 Power Consumption  <2.4 KVA
 Ambient Temperature  18oC-28oC
 Cooling Pure Water  Pure Water
 Dimension
 Weight  Approximate 100 Kg
 Size ( in mm )  Approximate 650 x 700 x 900

 
Lamp Pumped Laser Marker - 50W/100W
Technical Specification
 
  Laser   Lamp-Pumped Marking Laser
 Laser Source  Krypton Lamp
 Laser power  50W/80/100W
 Wavelength  1064 nm
 Beam quality M2  <10
 Peak to Peak Stability  3%
 Diode Life/ Lamp Life  600 hours
 Repeat Rate  100 to 30000HZ
 Repeatability  +0.050mm
 Marking Area(in mm)  100 x 100
 (150 x 150, 200 x 200 Optional)
 Marking Speed  Up to 7000 mm/sec.
 Min line width  0.008mm
 Electrical
 Electrical Connection  220V±10% V AC /50HZ/19A
 Power Consumption  <12 KVA
 Ambient Temperature  20oC-28oC
 Cooling Pure Water  DI Water
 Dimension
 Weight  460 Kg
 Size ( in mm )  1300 x 700 x 1100
The services offered for Laser Machine:
 
Laser Marking Job Work at Mumbai, Ahmedabad and Surat
Leasing of Laser Marker
AMC (Annual Maintenance Contract) and Servicing of all brand of Laser Markers
Spare parts, Accessories and Consumables for Laser Markers
   
Applications
 
Marking Alphanumeric, Serial Numbers, Part Numbers.
Marking of Logos, Schematics, Complex Graphics, Images and Pictures.
Bar-coding, 2D Data Matrix Codes, Lot Codes, Date Codes.
UID Marking (Unique Identification).
Deep Engraving.
Paint Removal from Plastic and Metal Surfaces.
Hologram marking
Automotive
 
Backlit, Bearing, Brake, Cam Shaft, Clutch, Crank Shaft, Engine ID Plates, Filter, Gear, Gasket, Hose, Injector, Mirror, Nozzle, Piston, Piston Ring, Shafts, Spark Plugs, Tag, Turbine, Valve.
Electrical
 
Battery, Cable, Connector, Electric Motor, Light Bulb, Plug, Regulator, Relay, Solenoid, Switches, Wire.
Electronics
 
Backlit, Cable, Chip Capacitors, Computer Keyboard Switch, Fuse Block, IC, Mobile & Computer Accessories, Mobile Battery Charger, Mobile Keypad, PCB, USB Drive.
Tools & Tooling
 
Cutting Tools, Carbide, Chucks, Dies, Diamond Tools, Drills, Gauges, Hammer, Hardened Steel Tools, Holding Device, Housing, HSS, Measuring Instruments, Milling Cutter, Pliers, Punch, PVC Pipe/Joints , Saw, Saw Blade, Screwdriver – Blades & Handles, Socket, Tungsten, Wrenches.
Medical/Surgical
 
Blade, Bit, Catheter, Implant, Needle, Scissor, Screw, Stent, Surgical Instruments.
Jewelry & Fashion accessories
 
It is our constant endeavor to achieve major market share in the metal marking application by providing identification and traceability solution.
Kitchenware & bath fittings
 
Bath Hook, Bathroom Taps, Cookware Set, Door Handle, Door Stopper, Faucets, Fork, Hardware, Hand Shower, Handrail & Baluster, Hanger Rod, Knife, Lemon Squeezer, Lock, Shower Trays, Shower Valves, Sign Plate, Spoon.
Giftware
 
Awards, Key Chains, Pen, Trophy.
 
 
Laser Marked Samples